NAME
    CMD_CLEAR -- throw away internal caches

FUNCTION
    CMD_CLEAR is a standard command for multiple audio channels.  For each
    selected channel (io_Unit), if the allocation key (ioa_AllocKey) is
    correct, CMD_CLEAR does nothing; otherwise, CMD_CLEAR returns an error
    (ADIOERR_NOALLOCATION).  CMD_CLEAR is synchronous and only replies
    (mn_ReplyPort) if the quick flag (IOF_QUICK) is clear.

INPUTS
    mn_ReplyPort- pointer to message port that receives I/O request after
                  if the quick flag (IOF_QUICK) is clear
    io_Device   - pointer to device node, must be set by (or copied from
                  I/O block set by) OpenDevice function
    io_Unit     - bit map of channels to clear (bits 0 thru 3 correspond
                  to channels 0 thru 3)
    io_Command  - command number for CMD_CLEAR
    io_Flags    - flags, must be cleared if not used:
                  IOF_QUICK - (CLEAR) reply I/O request
    ioa_AllocKey- allocation key, must be set by (or copied from I/O block
                  set by) OpenDevice function or ADCMD_ALLOCATE command

OUTPUTS
    io_Unit     - bit map of channels successfully cleared (bits 0 thru 3
                  correspond to channels 0 thru 3)
    io_Error    - error number:
                  0                    - no error
                  ADIOERR_NOALLOCATION - allocation key (ioa_AllocKey)
                                         does not match key for channel

[Back to Amiga Developer Docs]